01254 301021

Monthly Archives: March 2017

31 
Mar

Schrader 66073-67 Snap-In Gen4 type 433MHz

Schrader 66073-67 Snap-In Gen4 type 433MHz

Schrader 66073-67 Snap-In Gen4 type 433MHz

Schrader 66073-67 Snap-In Gen4 type 433MHz

OE Ref : 0053104671 or 56029398AB

Genuine OE Snap-in valve TPMS Sensor

GEN 4 Type 433MHZ

Can be located on any wheel – please follow vehicle relearn procedure.

Please observe speed ratings –  a rubber valve cannot be employed for speeds higher than 210 km/h because of centrifugal forces; in this case, it will be necessary to use a metal valve.

Ricambi Original TPMS – Fiat / Lancia / Alfa Romeo / Chrysler / Jeep / Dodge

Readmore..

Published Date: 31st March 2017
Category: Valve Kit
Tags:


 

31 
Mar

Replacement Stem – 8001 Aluminium valve stem for SEL Gen-Alpha

Replacement Stem – 8001 Aluminium valve stem for SEL Gen-Alpha

Replacement Stem - 8001 Aluminium valve stem for SEL Gen-Alpha

Replacement Stem – 8001 Aluminium valve stem for SEL Gen-Alpha

TPMS – Service Items

TPMS service kits include all the components necessary for the proper and careful service to tires and rims with TPMS systems are required. The “packs” are based on the characteristics of “manufacturer, model & year” attributable. Included are all necessary for the repair parts.

Check the application list for suitability.

Aluminium valve stem for SEL Gen-Alpha – 8001 Schrader

 

Advantages at a glance:

  • All service kit components in proven OEM quality
  • Good for your wallet – with damaged valve, the sensor must not be exchanged automatically
    (depending on the sensor)

Readmore..

Published Date: 31st March 2017
Category: Valve Kit
Tags:


 

31 
Mar

REPLACEMENT CLAMP-IN VALVES FOR TRW

REPLACEMENT CLAMP-IN VALVES FOR TRW

REPLACEMENT CLAMP-IN VALVES FOR TRW

REPLACEMENT CLAMP-IN VALVES FOR TRW

Readmore..

Published Date: 31st March 2017
Category: Valve Kit
Tags:


 

31 
Mar

RDV021 Single Huf / Beru Service Valve Kit – 43mm Silver

RDV021 Single Huf / Beru Service Valve Kit – 43mm Silver

RDV021 Single Huf / Beru Service Valve Kit - 43mm Silver

RDV021 Single Huf / Beru Service Valve Kit – 43mm Silver

Aluminium valve body with rubber grommet, valve core, and cap.

43mm long. Colour coded Neutral / Silver.

To fit Huf / BERU sensors 65735, 65736, 65737, 65738 and 65739.

The sensor is not included.

Nut torque 4 Nm. Torx screw torque 4 Nm.

Tyre pressure sensor valves should be fitted by a trained mechanic with the correct diagnostic & programming tools.

Readmore..

Published Date: 31st March 2017
Category: Valve Kit
Tags:


 

30 
Mar

Tyre Pressure Monitoring Systems FAQ

Tyre Pressure Monitoring Systems FAQ

Frequently Asked Questions from TPMS Warehouse  https://www.tpmswarehouse.co.uk/Frequently%20Asked%20Questions

Tyre Pressure Monitoring System parts from TPMS Warehouse

Tyre Pressure Monitoring System parts from TPMS Warehouse

How do TPMS Sensors Work?

Every sensor has a unique identification that it transmits to a receiver via wireless remote frequency at 433 MHz (euro standard). The receiver then transmits the data to the controller allowing the information to display to the driver.
They are powered by an internal battery; this battery cannot be replaced. The battery life is expected to last up to 5-7 years’ dependent on annual mileage. To save energy the sensor doesn’t transmit data unless it is rotating, which also prevents the spare tyre from being monitored.  With every transmission of data, the sensor will also send a battery state signal, which workshop tools can use to diagnose a low battery.

If the TPMS Fails Will This Illuminate a Warning Light?

If the TPMS Fails Will This Illuminate a Warning Light? Tyre monitor sensors
Yes, the TPMS warning light will typically illuminate to make the driver aware that there has been a failure in the sensor or to indicate that there has been pressure loss on one of the tyres and has become 25% under inflated.
TPMS sensors can fail due to impact, over tightening, not using the correct tyre valve core, electronic failure or battery discharge.
Some vehicles will self-program a newly installed TPMS sensor, however, some will require a relearn procedure as per handbook or a professional technician to program it to your vehicle.

Do I Have to Have my TPMS Sensors Installed?

Yes, from 2014 will include all cars that had TPMS fitted as standard after 2012, as part of the MOT in the UK your vehicle must have any original safety features activated and fully working. Effective from November 2014 all new cars sold in the UK will have TPMS fitted as standard.

What Psi can they go up to?

We have many options available: Typically Rubber Snap-In Valves are developed for a maximum speed of 130 mph (210 km/h) and a maximum working tire pressure of 65 psi (4.5 bar). We strongly recommend the use of Clamp-In Valves for vehicles that are able to drive faster than 130 mph (210 km/h) and/or for tires with a working pressure of more than 65 psi (4.5 bar). Most UK vehicles operate under 50 Psi so there are no worries there.

Can I get replacement stems and valves?

Yes, we hold stocks of replacement stems and valves. Please call us to order any spare or replacement parts or search via your vehicle search.

Can I install them myself?

The TPMS will need to be installed by a professional tyre fitter, as special TPMS Torque Wrench tools are required to install them to the manufacturer specifications. Full fitting instructions are included on the warranty leaflet. We sell fitting tools direct in the shop.

When is it necessary to teach the sensors to the vehicle?

If a new sensor ID is generated then this has to be learned on the vehicle.
The teaching procedures on vehicles differ considerably. Basically, a difference is made between four versions: automatic teaching, during a driving procedure, via the OBDII interface in the vehicle or manually on the onboard computer. You can find out the procedure to be used in the vehicle manual or by contacting the manufacturer.
For convenience, we have tried to supply the relearn required alongside the search your vehicle facility. To avoid having to teach in new sensors – we can clone your originals as described below.

Readmore..

Published Date: 30th March 2017
Category: TECH: Help
Tags: ,


 

30 
Mar

Tyre Pressure Monitoring Systems

Tyre Pressure Monitoring Systems

Sence it Retro fit kit 01

How do TPMS Sensors Work?

Every sensor has a unique identification that it transmits to a receiver via wireless remote frequency at 433 MHz (euro standard). The receiver then transmits the data to the controller allowing the information to display to the driver.
They are powered by an internal battery; this battery cannot be replaced. The battery life is expected to last up to 5-7 years’ dependent on annual mileage. To save energy the sensor doesn’t transmit data unless it is rotating, which also prevents the spare tyre from being monitored.  With every transmission of data, the sensor will also send a battery state signal, which workshop tools can use to diagnose a low battery.

1210

What If My TPMS Sensor Needs Replacing

If the TPMS warning light is illuminated on your vehicle’s dashboard it will usually indicate a pressure drop in one or more of the vehicle’s tyres & needs immediate attention, however if the light is on due to sensor malfunction, usually due to battery failure, or physical damage, then the sensor will require replacement, use our vehicle search facility or contact one of our team for help finding the correct replacement.
Installing the replacement sensor will require tyre removal by a professional tyre fitter, the old sensor removing and the replacement sensor fitting correctly to the manufacturer’s specifications.

MaxiTPMS TS501 - TPMS Diagnostic / Service / Programmer

MaxiTPMS TS501 – TPMS Diagnostic / Service / Programmer

After fitting the sensor will require pairing with your car, the pairing procedure can usually be found in the vehicles handbook alternatively use our vehicle lookup or call a member of staff. The relearn procedure may be as simple as driving the car for a few miles, alternatively your vehicle may require dealer level programming and will incur additional installation costs, however this cost can be avoided by cloning the replacement sensor to the old sensor thus creating an exact copy, usually all we need is a number printed on your old sensor so don’t throw it away just yet, cloning would be done prior to shipping ask one of our team for details.

Readmore..

Published Date: 30th March 2017
Category: TPMS
Tags:


 

30 
Mar

TPMS Valve

TPMS Valve

TPMS Valve

TPMS Valve

We stock all TPMS valve stems and consumables if you’re unsure which type of Valve stem you need why not give us a call on 01254 301021 or chat to our TPMS experts on our website.

590337

Whether it be for a Porsche 911 or a Ford Focus we have a wide range of stems and service kits available to keep your Tyre Pressure Monitoring System fully functional. A Valve stem should be serviced at every tyre change to ensure the components are in good working order a service kit includes:

  • Valve Cap
  • Valve Core
  • Rubber sealing ring
  • Valve Nut

Are you a Garage? We have a Master Service Kit, the best solution for servicing 99% of OE TPMS stems in the market, this contains multiple service kits for wide coverage (all parts are re-stockable)

591394

Readmore..

Published Date: 30th March 2017
Category: TPMS
Tags:


 

30 
Mar

TPMS

TPMS

TPMS Warehouse Suppliers of OEM & Aftermarket TPMS Sensors

TPMS Systems

TPMS Warehouse TPMS Systems

TPMS Warehouse supplies a wide range of OEM & Aftermarket TPMS sensors for over 60 Vehicle Manufacturers with a 99.9% coverage, so you can assure we stock a compatible sensor for your car. With our unrivaled support and prices starting at only £45 it’s easy to see why TPMS Warehouse is the preferred choice for replacement TPMS Sensors. Check your vehicle compatibility now with our vehicle lookup.

At TPMS Warehouse all sensors are pre-programed for your vehicle prior to shipping however during the fitting / relearn process

MaxiTPMS TS601 - TPMS Diagnostic / Service / Programming

MaxiTPMS TS601 – TPMS Diagnostic / Service / Programming

over 35% of vehicles requires additional dealer level programming, TPMS Warehouse offers a cloning service to prevent these additional costs. Check your Vehicle just enter your vehicle details or registration above or contact one of our support team using Online Chat, email info@tpmswarehouse.co.uk or telephone 01254 959222. Check out our Frequently Asked Questions

Schrader TPMS Sysrems

Schrader TPMS

autel 1

Autel TPMS

How do TPMS Sensors Work?

Every sensor has a unique identification that it transmits to a receiver via wireless remote frequency at 433 MHz (euro standard). The receiver then transmits the data to the controller allowing the information to display to the driver.
They are powered by an internal battery; this battery cannot be replaced. The battery life is expected to last up to 5-7 years’ dependent on annual mileage. To save energy the sensor doesn’t transmit data unless it is rotating, which also prevents the spare tyre from being monitored.  With every transmission of data, the sensor will also send a battery state signal, which workshop tools can use to diagnose a low battery.

– See more at: https://www.tpmswarehouse.co.uk/index.php?route=common/home#sthash.xLlVA8j9.dpuf

Readmore..

Published Date: 30th March 2017
Category: TPMS
Tags:


 

30 
Mar

TPMS Sensors

TPMS Sensors

TPMS Warehouse Suppliers of OEM & Aftermarket TPMS Sensors

TPMS Snsors

TPMS Sensors

TPMS Warehouse TPMS Systems

TPMS Warehouse supplies a wide range of OEM & Aftermarket TPMS sensors for over 60 Vehicle Manufacturers with a 99.9% coverage, so you can assure we stock a compatible sensor for your car. With our unrivaled support and prices starting at only £45 it’s easy to see why TPMS Warehouse is the preferred choice for replacement TPMS Sensors. Check your vehicle compatibility now with our vehicle lookup.

At TPMS Warehouse all sensors are pre-programed for your vehicle prior to shipping however during the fitting / relearn process

TPMS Sensors Schrader TPMS Systems

TPMS Sensors

Schrader TPMS

over 35% of vehicles requires additional dealer level programming, TPMS Warehouse offers a cloning service to prevent these additional costs. Check your Vehicle just enter your vehicle details or registration above or contact one of our support team using Online Chat, email info@tpmswarehouse.co.uk or telephone 01254 959222. Check out our Frequently Asked Questions

Readmore..

Published Date: 30th March 2017
Category: TPMS
Tags: , , ,


 

30 
Mar

TPMS Systems

TPMS Warehouse Suppliers of OEM & Aftermarket TPMS Sensors

TPMS Systems

TPMS Warehouse TPMS Systems

TPMS Warehouse supplies a wide range of OEM & Aftermarket TPMS sensors for over 60 Vehicle Manufacturers with a 99.9% coverage, so you can assure we stock a compatible sensor for your car. With our unrivaled support and prices starting at only £45 it’s easy to see why TPMS Warehouse is the preferred choice for replacement TPMS Sensors. Check your vehicle compatibility now with our vehicle lookup.

At TPMS Warehouse all sensors are pre-programed for your vehicle prior to shipping however during the fitting / relearn process

Schrader TPMS Sysrems

Schrader TPMS

over 35% of vehicles requires additional dealer level programming, TPMS Warehouse offers a cloning service to prevent these additional costs. Check your Vehicle just enter your vehicle details or registration above or contact one of our support team using Online Chat, email info@tpmswarehouse.co.uk or telephone 01254 959222. Check out our Frequently Asked Questions

– See more at: https://www.tpmswarehouse.co.uk/#sthash.IJUakJWp.dpuf

Readmore..

Published Date: 30th March 2017
Category: TPMS
Tags: